Avaya G450 Cli Reference Manual page 789

Parameter
range
start_port
end_port
User Level
read-write
Context
ip pbr-list ip-rule, ip qos-list ip-rule, ip capture-list ip-rule, ip access-control-list ip-rule, ip
crypto-list ip-rule
Note:
The not form of the command is not relevant in the crypto-list ip-rule context.
Note:
Example
To specify that rule 22 applies to all packets whose source port is greater than port 95:
G450-001(ACL 330/ip rule 22)# udp source-port gt 95
To specify that rule 22 applies to all packets whose source port is less than or equal to port 95:
G450-001(ACL 330/ip rule 22)# not udp source-port gt 95
Related Commands - Policy-based routing
destination-ip, dscp (policy-based routing, packet sniffing,
capture-list, source-ip,
Related Commands - Policy
composite-operation, destination-ip,
dscp-table, show isdn bri
udp destination-port
Related Commands - VPN
description (ip rule), destination-ip,
icmp, ip crypto-list, ip-protocol,
show ip crypto-list, tcp
Description
Keyword indicating that a range of
ports is specified
The start of a port range for which
to apply the rule
The end of a port range for which
to apply the rule
tcp destination-port, tcp
dscp (policy), icmp,
link, source-ip, tcp
dscp (policy-based routing, packet sniffing,
ip-rule (VPN), local-address,
destination-port, tcp source-port,
Possible Values
VPN), icmp, ip-protocol,
source-port, udp destination-port
show composite-operation,
destination-port, tcp established,
protect crypto
udp destination-port
Policy-based routing
Default
Value
show ip
show
tcp source-port,
VPN), fragment,
map, source-ip,
Issue 1 January 2008 789