Fragment - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands - Policy
composite-operation, destination-ip, icmp,
source-ip, tcp
source-port, cos,

fragment

Use the fragment command to apply the current rule for non-initial fragments only.
Note:
You cannot specify TCP/UDP ports or ICMP code/type for a rule when using the
Note:
fragment command.
Syntax
fragment
User Level
read-write
Context
ip qos-list composite-operation, ip capture-list ip-rule, ip pbr-list ip-rule,
ip access-control-list ip-rule, ip qos-list ip-rule, ip crypto-list ip-rule
Example
To apply the rule for non-initial fragments:
G450-001(super-Capture 520/ip rule 15)# fragment
Related Commands - Packet sniffing
dscp (policy-based routing, packet sniffing,
capture-list, source-ip,
source-port
Related Commands - Policy-based routing
dscp (policy-based routing, packet sniffing,
routing), show ip
Related Commands - Policy
composite-operation,
bri link, source-ip,
udp source-port, cos,
734 Avaya G450 CLI Reference
destination-port, tcp established,
name
tcp destination-port,
next-hop-list, show isdn bri link
dscp (policy), destination-ip, icmp,
tcp destination-port,
name
show composite-operation,
tcp source-port,
VPN), destination-ip, icmp, ip-protocol,
tcp source-port, udp
VPN), destination-ip,
show
tcp established, tcp source-port,
Policy - QoS lists
show isdn bri
udp destination-port,
show ip
destination-port, udp
next-hop (policy-based
composite-operation,
udp destination-port,
link,
udp
show isdn