Show Rtp-Stat Summary - Avaya G450 Cli Reference Manual

CLI Commands
To display the last five sessions:
G450-001(super)# show rtp-stat sessions last 5
ID QoS Start date and time End Time Type
----- --- ------------------- -------- ------- ---------------
00031 2004-10-20,10:51:36 10:59:07 G729
00032 * 2004-10-20,10:53:42 10:57:36 G723
00033 * 2004-10-20,10:58:21 10:59:06 G723
00034 2004-10-20,11:08:40
00035 * 2004-10-20,11:09:07
Note:
For an explanation of the output fields, see the explanations in the chapter
Note:
Configuring monitoring applications, in Administration for the Avaya G450 Media
Gateway, 03-602055.
Related Commands
rtp-stat clear, rtp-stat
rtp-stat qos-trap-rate-limit, rtp-stat-service,
detailed, show rtp-stat

show rtp-stat summary

Use the show rtp-stat summary command to display a summary of the RTP statistics.
Syntax
show rtp-stat summary
User Level
read-write
Context
general
Example
To display a summary of the RTP statistics (in this example, there are two active sessions, one
with QoS problems (35)):
G450-001(super)# show rtp-stat summary
Total QoS traps: 23
QoS traps Drop : 0
Qos Fault
Engine
916 Avaya G450 CLI Reference
event-threshold, rtp-stat
rtp-stat
summary, show rtp-stat
Active
Destination
135.8.76.64
135.8.76.107
135.8.76.107
- G729 135.8.76.64
- G723 135.8.76.107
fault, rtp-stat min-stat-win,
threshold, show rtp-stat
thresholds, show rtp-stat traceroute
Total Mean
RTP statistics
rtp-stat qos-trap,
config, show rtp-stat
Tx