show port redundancy
Use the show port redundancy command to display information about software port
redundancy pairs defined on the media gateway.
Syntax
show port redundancy
User Level
read-only
Context
general
Example
To display port redundancy information:
G450-001(super)# show port redundancy
Redundancy Name
-----------------
bud
3/48
jack
3/46
tony
3/1
wayne
3/34
Minimum Time between Switchovers: 1
Switchback interval: 3
Related Commands
set port
redundancy,
Port status
show port
Use the show port command to display port status on I/O modules. If no port is specified,
information for all ports is displayed.
Syntax
show port [module[/port]]
Primary Port
--------------
3/47
3/45
3/2
3/33
set port redundancy
enable|disable,
Secondary Port
----------------
secondary
secondary
primary
secondary
set port redundancy-intervals
Issue 1 January 2008
Port status
Status
--------
807