Set Password - Avaya G450 Cli Reference Manual

Related Commands - BRI commands
bri, clear bri, set
directory-number-b,
set side, set spid-a,
Related Commands - SLS commands
set sls, show sls,

set password

Use the set password command to administer a station password for DCP and IP station sets
in SLS. If an IP Softphone in RoadWarrior mode is using the administrative identity of a DCP
phone, then the password is required.
Syntax
set password password
Parameters
Parameter
password
User Level
read-write
Context
sls > station
Example
To set a given station password to 12345:
G450-001 (sls-station <extension>)# set password 12345
Related Commands
set cor, set expansion-module,
trunk-destination,
bearer-capability, set
set endpoint-init, set
set spid-b, set tei-assignment,
sls
Description
A 4-8 digit numeric password
set name,
set type (station), show
country-protocol, set directory-number-a,
interface, set interface-companding,
show bri,
set port, set sls, set
(station), show sls, station,
SLS survivability
set
set layer1-stable,
show (bri)
Possible
Values
swhook-flash, set
sls
Issue 1 January 2008
Default
Value
1025