Parameters
Parameter
module
port
User Level
read-only
Context
general
Example
To display the flowcontrol advertisement for all ports:
G450-001(super)# show port auto-negotiation-flowcontrol-advertisement
asym-tx-only 4/49
Port 4/49 pause capabilities was set
Related Commands
set port
auto-negotiation-flowcontrol-advertisement,
set port edge admin
name,
set port
state,
show port flowcontrol
show port edge state
Use the show port edge state command to display the edge state of the specified port. If
no port is specified, information for all ports is displayed.
Syntax
show port edge state [module/[port]]
Description
The module number
The port number
state,
set port enable |
negotiation,
set port point-to-point admin
Possible
Values
set port enable |
disable,
set port
flowcontrol,
status,
set port
Ethernet port configuration
Default
Value
disable,
set port
duplex,
set port
level,
set port
speed,
show port edge
Issue 1 January 2008
387