Route Redistribution; Default-Metric (Interface Route Metric Value); Default-Metric (Ospf) - Avaya G450 Cli Reference Manual

Route redistribution

default-metric (interface route metric value)

Use the default-metric command to set the interface route metric value. Use the no form of
this command to restore the default value.
Syntax
default-metric number
no default-metric
Parameters
Parameter
number
User Level
read-write
Context
interface: Loopback (L2-L3, L3), Serial (DS1 PPP L2-L3, DS1 PPP L3, DS1 FR-SUB L2-L3,
DS1 FR-SUB L3, USP PPP L2-L3, USP PPP L3), FastEthernet L2-L3, L3, PPP L2-L3, PPP L3),
VLAN (L2-L3, L3), Tunnel (L2-L3, L3), Dialer (L2-L3, L3)
Example
To set the default metric to 10:
G450-001(if:FastEthernet 10/2)# default-metric 10

default-metric (OSPF)

Use the default-metric command to set the default metric of redistributed routes for the
OSPF protocol. Use the no form of this command to restore the default value.
Syntax
default-metric default_metric
Description
The interface route metric value
Route redistribution
Possible Default
Values Value
1-15 1
Issue 1 January 2008 879