Tunnel Dscp - Avaya G450 Cli Reference Manual

Parameters
Parameter
ip-address
User Level
read-write
Context
Interface: Tunnel (L2, L2-L3)
Example
To specify that the GRE tunnel destination IP address is 168.30.10.2:
G450-001(super)# tunnel destination 168.30.10.2
Related Commands
keepalive (GRE
source, tunnel ttl

tunnel dscp

By default, the GRE header copies the DSCP value from the header of the original packet. Use
the tunnel dscp command to override the original packet's DSCP with the specified DSCP
value. Use the no form of the command to use the DSCP value of the original packet.
Syntax
tunnel dscp dscp
no tunnel dscp
Parameters
Parameter
dscp
Description
The destination IP address for the GRE tunnel
tunnel), tunnel checksum,
Description
The DSCP value to be used instead of the
DSCP from the header of the original packet
tunnel key, tunnel path-mtu-discovery,
GRE tunneling
Possible Default
Values Value
tunnel
Possible Default
Values Value
0-63
Issue 1 January 2008 445