Snmp Trap Configuration; Set Port Trap - Avaya G450 Cli Reference Manual

CLI Commands
Context
general
Example
To configure settings for an SNMP MIB view named internet including Oidtree 1.3.6.1:
G450-001(super)# snmp-server view internet 1.3.6.1 included
Related Commands - SNMP access configuration
ip snmp, set snmp
engineID, show snmp
snmp usertogroup,
snmp-server group,
Related Commands - SNMP trap configuration
set port trap, set snmp trap enable | disable
show port trap,
snmp-server host,
Related Commands - Dynamic trap manager
snmp-server dynamic-trap-manager

SNMP trap configuration

set port trap

Use the set port trap command to enable or disable generic SNMP uplink or downlink
traps from a port.
Syntax
set port trap module/port {enable|disable}
1086 Avaya G450 CLI Reference
community, set snmp
group, show snmp
show snmp view,
snmp-server remote-user,
show snmp, snmp trap
snmp-server informs
retries, set snmp timeout,
retries, show snmp
snmp-server community,
snmp-server user
auth, set snmp trap enable | disable
link-status, snmp-server enable
SNMP trap configuration
show snmp, show snmp
timeout, show snmp user,
snmp-server engineID,
frame-relay,
notifications,
show