Avaya G450 Cli Reference Manual page 389

Parameters
Parameter Description
Number of the module
module
Number of the port on the module
port
User Level
read-only
Context
general
Example
To display flowcontrol information for port 4 of module 3 on the G450:
G450-001(super)# show port flowcontrol 3/4
Port Send-Flowcontrol Receive-Flowcontrol
Admin Oper
------ ----- ----
3/4 off off
Related Commands
set port auto-negotiation-flowcontrol-advertisement,
set port edge admin state,
name, set port negotiation,
auto-negotiation-flowcontrol-advertisement,
Output fields
Field
Port
Send-
Flowcontrol-Admin
Admin Oper
----- ----
off off
set port enable | disable,
set port point-to-point admin
show port edge state
Description
Module and port number
Send flow-control administration. Possible settings:
On — indicates that the local port is allowed to send flow
control frames to the far end.
Off — indicates that the local port is not allowed to send flow
control frames to the far end.
Ethernet port configuration
Possible
Values
set port enable | disable,
set port flowcontrol, set port
status, set port speed,
Issue 1 January 2008
Default
Value
set port duplex,
level, set port
show port
1 of 2
389