Set Port Point-To-Point Admin Status - Avaya G450 Cli Reference Manual

CLI Commands
Example
To disable auto-negotiation on port 6/5:
G450-001# set port negotiation 6/5 disable
Link negotiation protocol disabled on port 6/5.
Related Commands
set port auto-negotiation-flowcontrol-advertisement,
set port edge admin
name, set port point-to-point admin
auto-negotiation-flowcontrol-advertisement,

set port point-to-point admin status

Use the set port point-to-point admin status command to manage the connection
type of the port.
Syntax
set port point-to-point admin status module/port admin_status
Parameters
Parameter
module
port
admin_status
384 Avaya G450 CLI Reference
state, set port enable |
status,
Description
Number of the module
Number of the port on the
module.
You can also specify a range
of ports separated by a dash,
for example, 10/5-6 for both
ETH LAN ports 5-6 on the
front panel.
The connection type of the
port
set port enable |
disable, set port flowcontrol,
set port speed, show port
show port edge state,
Possible Values
force-true — specify
that the port is
connected
point-to-point
force-false — specify
that this port is shared
media
auto — try to
automatically detect
the connection type of
the port
Ethernet port configuration
disable, set port duplex,
set port level, set port
show port flowcontrol
Default
Value