Dialer Wait-For-Ipcp - Avaya G450 Cli Reference Manual

Parameters
Parameter
id
dial-
string
User Level
read-write
Context
interface:Dialer (L2, L2-L3)
Example
To add the phone number 6458458 to the dial list:
G450-001(if:Dialer 1)# dialer string 1 6458458
Related Commands
interface dialer,
dialer persistent initial
wait-for-ipcp

dialer wait-for-ipcp

Use the dialer wait-for-ipcp command to set the maximum time the dialer waits
between dialing a number to successfully establishing PPP/IPCP.
Syntax
[no] dialer wait-for-ipcp sec
Parameters
Parameter
sec
Description
The location of the phone number in the list
The modem string. The modem dial string may include
non-numeric characters. Refer to the modem "AT
Command" documentation at www.multitech.com.
dialer modem-interface,
delay, dialer persistent
Description
Time to wait
dialer order, dialer persistent,
max-attempts, dialer persistent
Dialer interface
Possible Default
Values Value
1-5
dialer persistent delay,
re-enable, dialer
Possible Default
Values Value
1-300 45
Issue 1 January 2008 331