Ignore Dcd; Invert Txclock - Avaya G450 Cli Reference Manual

Related Commands
bandwidth, ignore

ignore dcd

Use the ignore dcd command to specify how the system monitors the line to determine if it is
up or down. Specify ignore dcd to ignore DCD signals, and instead use DSR/CTS signals to
determine the line's status. Use the no form of the command to specify that DCD signals are
used to determine line status.
Syntax
[no] ignore dcd
User Level
read-write
Context
interface:Serial (USP FR-L2, USP PPP-L2, USP PPP L2-L3)
Example
To ignore DCD signals on an interface:
G450-001(if:Serial 3/1:1)# ignore dcd
Related Commands
bandwidth, idle-character,

invert txclock

Use the invert txclock command to invert the transmit clock signal from the data
communications equipment (DCE). Use the no form of the command to restore the signal to not
inverted.
Syntax
[no] invert txclock
User Level
read-write
dcd, interface serial, invert
interface serial,
txclock, nrzi-encoding,
invert txclock, nrzi-encoding,
USP configuration
transmitter-delay
transmitter-delay
Issue 1 January 2008 1171