Avaya G450 Cli Reference Manual page 547

Parameter
MsgFacility
none
severity
User Level
read-write
Context
general
Example
To filter VLAN messages sending only those having a severity of critical or greater:
G450-001(super)# set logging file condition vlan critical
Related Commands
clear logging file, clear logging
logging server condition,
logging session, show logging file
condition
Description
Apply the filter condition to
a specific MsgFacility
Keyword specifying not to
log messages to the file
sink
severity level is equal to or
more severe than the
specified level. 0 is the
highest severity and 7 the
lowest severity.
server, set logging
set logging server enable |
content, show logging server
Possible Values
boot, dialer, policy,
snmp, usb-modem,
cascade, dnsc, ppp,
stp, vlan, cdr, fan,
pppoe, supply, voice,
cli, filesys, qos,
switchfabric, wan,
cna_tp, ipsec, router,
system, config, isakmp,
rtp-stat, tftp, console,
lag, saa, threshold,
dhcps, poe, security,
tracker
Use the text value or its
numeric equivalent:
emergency (0)
alert (1)
critical (2)
error (3)
warning (4)
notification (5)
informational (6)
debugging (7)
server, set logging server
disable, set logging server
condition,
Issue 1 January 2008
Logging
Default
Value
access-level, set
facility, set
show logging session
547