Ip Address - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands
interface console,
interface USB-modem,
load-interval, show ip interface brief

ip address

Use the ip address command to assign an IP address and mask to an interface. Use the no
form of this command to delete an IP interface.
Syntax
ip address {ip_address mask [admin_state]}|negotiated
no ip address
Parameters
Parameter
ip_address
mask
admin_state
negotiated
User Level
read-write
Context
Interface: Console, Serial (DS1 PPP L2-L3, DS1 PPP L3, DS1 FR-SUB L2-L3, DS1 FR-SUB
L3, USP PPP L2-L3, USP PPP L3), FastEthernet (L2-L3, L3, PPP L2-L3, PPP L3), VLAN
(L2-L3, L3), USB-modem, Loopback (L2-L3, L3), Tunnel (L2-L3, L3), Dialer (L2-L3, L3)
Example
To assign the IP address 192.168.22.33 with mask 255.255.255.0 to the FastEthernet interface:
G450-001(if:FastEthernet 10/2)# ip address 192.168.22.33 255.255.255.0
472 Avaya G450 CLI Reference
interface fastethernet,
interface vlan, ip
Description
The IP address assigned to the interface
Mask for the associated IP subnet
The administration status. This parameter is not
used with the Console interface.
Interface receives address and mask from a remote
device
interface loopback, interface
address, ip admin-state,
IP interface configuration
serial, interface tunnel,
ip broadcast-address,
Possible Default
Values Value
up, down up