Avaya G450 Cli Reference Manual page 732

CLI Commands
Parameter
any
ip
wildcard
User Level
read-write
Context
ip capture-list/ip-rule, ip access-control-list/ip-rule, ip pbr-list/ip-rule, ip qos-list/ip-rule, ip
crypto-list ip-rule
Example
To specify that rule 22 applies to all packets having destination IP address 135.64.104.102:
G450-001(QoS 460/rule 22)# destination-ip host 135.64.104.102
To specify that rule 17 applies to packets whose destination IP address is not in the range of
176.13.0.0 through 176.13.255.255:
G450-001(QoS 460/rule 17)# not destination-ip 176.13.0.0 0.0.255.255
Related Commands - Packet sniffing
dscp (policy-based routing, packet sniffing,
source-ip, tcp
Related Commands - Policy-based routing
dscp (policy-based routing, packet sniffing,
next-hop-list, show isdn bri link
Related Commands - Policy
composite-operation,
isdn bri link, source-ip,
destination-port,
732 Avaya G450 CLI Reference
Description
Keyword that specifies the current rule
applies to any address
The range of IP addresses of the rule.
The zero bits in the wildcard correspond to
bits in the IP address that remain fixed. The
one bits in the wildcard correspond to bits in
the IP address that can vary.
Note: This is the opposite of how bits are
used in a netmask.
destination-port, tcp source-port,
dscp (policy),
tcp destination-port,
udp source-port
VPN), icmp, ip-protocol,
udp destination-port,
VPN), next-hop (policy-based
show dscp-table, icmp,
tcp established,
Policy - QoS lists
Possible Default
Values Value
show ip capture-list,
udp source-port
routing),
show composite-operation,
tcp source-port, udp
show ip
show