show trunk
Use the show trunk command to display VLAN tagging information for the media gateway. If
no port is specified, information for all ports is displayed.
Syntax
show trunk [module[/port]]
Parameters
Parameter
module
port
User Level
read-only
Context
general
Example
To display binding information for port 10/5 to port 10/6:
G450-001(super)# show trunk 10/5-6
Port
Mode
------ ----- ---------------
10/5
off
Port
Mode
------ ----- ---------------
10/6
off
Description
Number of the module
Number of the port on the module. You can also
specify a range of ports separated by a dash, for
example, 10/5-6 for both ETH LAN ports 5-6 on the
front panel.
Binding mode
Native vlan
-----------
statically bound
Binding mode
Native vlan
-----------
statically bound
Vlans allowed on trunk
----------------------
1
1
Vlans allowed on trunk
----------------------
1
1
VLAN configuration
Possible
Default
Values
Value
Issue 1 January 2008
1191