Rtp-Stat Event-Threshold - Avaya G450 Cli Reference Manual

CLI Commands

rtp-stat event-threshold

Use the rtp-stat event-threshold command to set thresholds on the QoS event
counters incremented by the RTP statistics application. If one or more event thresholds are
exceeded during an RTP stream and the RTP statistics application is configured to generate
QoS SNMP traps, a trap is generated upon termination of the RTP stream. Use the
qos-trap command to configure the RTP statistics application to automatically generate QoS
traps. Use the
thresholds should be configured such that the sending of a trap corresponds to a customer's
actual experience of QoS problems during the stream.
Syntax
rtp-stat event-threshold
{all|codec-loss|codec-rtt|echo-return-loss|loss|remote-loss|rtt|
jitter|remote-jitter|ssrc-change} num
no rtp-stat event-threshold
{all|codec-loss|codec-rtt|echo-return-loss|loss|remote-loss|rtt|
jitter|remote-jitter|ssrc-change}
Parameters
Parameter
all
codec-loss
codec-rtt
echo-return-loss
loss
remote-loss
902 Avaya G450 CLI Reference
rtp-stat threshold command to configure the QoS metric thresholds. Event
Description
Keyword specifying to set all event
thresholds to the specified number
Keyword specifying to set the event
threshold for the codec-loss metric
Keyword specifying to set the event
threshold for the codec-rtt metric
Keyword specifying to set the event
threshold for the echo-return-loss
metric
Keyword specifying to set the event
threshold for the loss metric
Keyword specifying to set the event
threshold for the remote-loss metric
RTP statistics
rtp-stat
Possible Default
Values Value