Show Protocol - Avaya G450 Cli Reference Manual

show protocol

Use the show protocol command to display the status of a specific management protocol,
or all protocols.
Syntax
show protocol
[ssh|telnet-client|ssh-client|https|snmp|telnet|telnet-services|http|
scp|icmp|recovery-password|ftp-client|tftp|dhcp|dns-client]
Parameters
Parameter
ssh
telnet-client
ssh-client
https
snmp
telnet
telnet-services
http
scp
icmp
recovery-password
ftp-client
tftp
Description
Keyword indicating to display the status of
the ssh protocol
Keyword indicating to display the status of
the telnet-client protocol
Keyword indicating to display the status of
the ssh-client protocol
Keyword indicating to display the status of
the https protocol
Keyword indicating to display the status of
the SNMP protocol
Keyword indicating to display the status of
the telnet protocol
Keyword indicating to display the status of
the telnet protocol on the Services
interface
Keyword indicating to display the status of
the HTTP protocol
Keyword indicating to display the status of
the SCP protocol
Keyword indicating to display the status of
the ICMP protocol
Keyword indicating to display the status of
the recovery-password protocol
Keyword indicating to display the status of
the FTP-client protocol
Keyword indicating to display the status of
the TFTP protocol
DNS resolver
Possible Default
Values Value
Issue 1 January 2008 351