CLI Commands
Examples
To enable the transmission of optional TLV management-address for port 10/3:
G450-001(super)# set port lldp tlv 10/3 enable management-address
G450-001(super)# set port lldp tlv 10/3 enable vlan-name 2
Related Commands
set lldp
re-init-delay,
tx-interval,
set port
vlan-name config
show lldp
Use the show lldp command to display the LLDP information received on each port.
Syntax:
show lldp [module/port]
Parameters
Parameter
module
port
User Level
read-only
Context
general
538 Avaya G450 CLI Reference
set lldp
system-control,
lldp,
show
lldp,
show lldp
Description
Number of module
Number of port(s)
set lldp
tx-delay,
set lldp
config,
show port lldp
tx-hold-multiplier,
set lldp
config,
show port lldp
Possible
Default
Values
Value
1-10
LLDP