Ds-Mode - Avaya G450 Cli Reference Manual

ds-mode

Use the ds-mode command to specify the mode of the controller.
Note:
When you change the ds-mode, you must copy the running configuration to the
Note:
startup configuration and reset the device.
Syntax
ds-mode {e1|t1}
Parameters
Parameter
e1
t1
User Level
admin
Context
general
Example
To set the controller to operate in T1 mode:
G450-001(super)# ds-mode t1
To change ds-mode, copy the running configuration to the start-up configuration file, and reset
the device.
Related Commands
clear controller
source, fdl, framing,
show controllers,
Description
Keyword specifying to set the mode to E1
Keyword specifying to set the mode to T1
counters, controller, cablelength
interface serial, ip
show controllers remote,
long, cablelength
address, linecode (E1),
show ds-mode
E1/T1 interfaces
Possible Default
Values Value
short, channel-group,
linecode (T1), loopback, remote,
Issue 1 January 2008
clock
369