Be Out - Avaya G450 Cli Reference Manual

be out

Use the be out command to configure the excess burst size in bits, for the outbound direction.
Use the no form of this command to return the excess burst size to its default value.
Note:
The Excess Information Rate (EIR) is equal to: (BC+BE)/Tc/1000, where Tc is the
Note:
Frame Relay meter time interval in mSec, BC is the committed burst rate and BE
is the excess burst size.
Syntax
be out bits
no be out
Parameters
Parameter
bits
User Level
read-write
Context
map-class frame-relay
Example
To configure outbound BE to be 64 Kbit:
G450-001(map-class)# be out 64000
Related Commands - Traffic shaping
interface serial,
show map-class
traffic-shape-statistics,
Description
The excess burst size in bits
frame-relay traffic-shaping,
frame-relay, show traffic-shape,
traffic-shape rate
map-class frame-relay,
show traffic-shape-queue,
Traffic shaping
Possible Default
Values Value
0-39999999 7000
bc out, cir out, fragment,
show
Issue 1 January 2008 1147