Set Tac - Avaya G450 Cli Reference Manual

CLI Commands
Example
To define the incoming signaling supervision mode as wink mode:
G450-001 (sls-trunk-group-<tgnum>)# set supervision wink
To define the incoming signaling supervision mode as wink-wink mode:
G450-001 (sls-trunk-group-<tgnum>)# set supervision wink-wink
Related Commands
add port, clear
cbc-service-feature,
set digits, set digit-handling,
set japan-disconnect,
tac, set trunk-hunt,

set tac

Use the set tac command to administer the trunk-access codes for SLS. You must issue this
command before the trunk group is enabled in the SLS database.
Syntax
set tac tac
Parameters
Parameter
tac
* This trunk-access code must be unique across all trunk groups, extension numbers, and any ARS Feature
Access Code strings.
User Level
read-write
Context
sls > trunk-group
1060 Avaya G450 CLI Reference
tac, clear trunk-group,
set channel-preference,
set digit-treatment,
set name, set numbering-format,
set sls, show (trunk-group),
Description
Unique dial string identifies the trunk group
(circumvents normal Automatic Route System
dial string analysis)
remove port, set cbc,
set codeset-display,
set incoming-destination,
set send-name,
show sls, show trunk-group
SLS survivability
set cbc-parameter, set
set codeset-national,
set incoming-dialtone,
set send-number,
sls, trunk-group
Possible
Values
*
1-4 digits (can
include "#" and
"*" as the
leading digit
only)
set dial,
set
Default
Value