Control-Port; Rtp-Echo-Port - Avaya G450 Cli Reference Manual

CLI Commands

control-port

Use the control-port command to set the UDP port on which the CNA test plug listens for
test requests from schedulers. Use the no form of the command to return to the default control
port.
Syntax
control-port port
no control port
Parameters
Parameter
port
User Level
read-write
Context
cna-testplug
Example
To set the control port to port number 12843:
G450-001(cna-testplug 1)# control-port 12843
Related Commands
clear counters (CNA test
scheduler, show cna

rtp-echo-port

Use the rtp-echo-port command to set the UDP port used by the CNA test plug to listen for
RTP streams send by other test plugs running RTP tests. Use the no form of the command to
return the RTP echo port to its default.
Syntax
rtp-echo-port port
216 Avaya G450 CLI Reference
Description
The UDP port number to be used as the control port
plugs), cna testplug, cna-testplug-service, rtp-echo-port, rtp-test-port,
testplug, shutdown (CNA test
Possible
Values
1-65535
plugs), test-rate-limit
CNA test plugs
Default
Value
8888