Avaya G450 Cli Reference Manual page 804

CLI Commands
Parameters
Parameter
prim_module
prim_port
second_module
second_port
on
off
redundancy_name
User Level
read-write
Context
general
Example
To specify that port 10/6 acts as a backup port for port 10/5, and to name the redundancy pair
red1:
G450-001(super)# set port redundancy 10/5 10/6 on red1
red1: Port 10/6 is redundant to port 10/5.
Port redundancy is active - entry is effective immediately
Note:
If you wish to define a name which includes spaces, you must enclose the entire
Note:
name in quotation marks, for example "new york".
Related Commands
set port redundancy
804 Avaya G450 CLI Reference
Description
The module number of the primary port
Primary port of the redundancy scheme
The module number of the backup port
Backup port of the redundancy scheme
Keyword specifying to define the
redundancy pair
Keyword specifying to remove the
redundancy pair
Name for the redundancy scheme
enable|disable, set port redundancy-intervals,
Port redundancy
Possible Default
Values Value
show port redundancy