Avaya G450 Cli Reference Manual page 664

CLI Commands
Parameters
Parameter
any
eq
lt
gt
port_name
port_number
range
start_port
end_port
User Level
read-write
Context
ip pbr-list ip-rule, ip capture-list ip-rule, ip qos-list ip-rule, ip access-control-list ip-rule, ip
crypto-list ip-rule
Note:
The not form of the command is not relevant in the crypto-list ip-rule context.
Note:
Example
To specify that rule 22 applies to all packets whose source port is greater than port 95:
G450-001(ACL 330/ip rule 22)# tcp source-port gt 95
To specify that rule 22 applies to all packets whose source port is less than or equal to port 95:
G450-001(ACL 330/ip rule 22)# not tcp source-port gt 95
664 Avaya G450 CLI Reference
Description
Keyword that specifies to apply the rule to a port
with any name or number
Keyword that specifies to apply the rule to a port
whose name or number matches exactly to the
specified name or number
Keyword that specifies to apply the rule to a port
whose name or number is less than the specified
name or number
Keyword that specifies to apply the rule to a port
whose name or number is greater than the
specified name or number
The name of the port for which to apply the rule
The number of the port for which to apply the rule
Keyword indicating that a range of ports is
specified
The start of a port range for which to apply the rule
The end of a port range for which to apply the rule
Packet sniffing
Possible Default
Values Value