Username - Avaya G450 Cli Reference Manual

CLI Commands
Example
To display all defined user accounts:
G450-001(super)# show username
User account
-----------
root
tsmith
readwrite
Related Commands

username

username
Use the username command to add a local user account. Use the no form of the command to
remove the user account from the system.
By default there is only a single user account, named root, with password root, which accesses
the administrator level. You cannot delete this basic user account, nor modify its access level.
However, you can modify its basic password.
Note:
For security reasons, you should change the root password immediately.
Note:
Syntax
username name [password passwd | asg-secret secret] access-type
access_type
no username name
Parameters
Parameter
name
passwd
1166 Avaya G450 CLI Reference
password access-type
-------- ------------
***** admin
***** read-only
***** read-write
Description
New user name or
dadmin
User's password
Possible Values
minimum four character string
minimum eight character string
Users
Default
Value