Set Contact-Closure Pulse-Duration - Avaya G450 Cli Reference Manual

Parameter
manual-trigger
manual-off
User Level
read-write
Context
general
Example
To specify that contact closure for relay 2 of port 1 on module 10 is controlled by the call
controller:
G450-001(super)# set contact-closure admin 10/1:2 mgc
Related Commands
set contact-closure

set contact-closure pulse-duration

Use the set contact-closure pulse-duration command to set the pulse duration for a
contact closure relay. Pulse duration is the amount of time for the relay to return to normal after
the call controller triggers it.
Syntax
set contact-closure pulse-duration module/port:relay time
Parameters
Parameter
module
port
relay
time
Description
Contact closure relay is triggered
Contact closure relay is not triggered
pulse-duration, show contact-closure
Description
Module number of the contact closure port
Port number of the contact closure port
Relay number
Amount of time until the relay returns to
normal, in seconds
Contact closure
Possible Default
Values Value
Possible Default
Values Value
10
1
1, 2
1-60
Issue 1 January 2008 245