Snmp-Server View - Avaya G450 Cli Reference Manual

Related Commands - SNMP access configuration
ip snmp, set snmp
engineID, show snmp
snmp usertogroup,
snmp-server group,
Related Commands - SNMP trap configuration
set port trap, set snmp trap enable | disable
show port trap,
snmp-server host,

snmp-server view

Use the snmp-server view command to configure settings for an SNMP MIB view. If the
view does not exist, it is created. An MIB view specifies a particular section or subsection of the
MIB tree. You can create a view that includes a particular subsection, or excludes one. Use the
no form of the command to delete the current view.
Syntax
snmp-server view view-name oid-subtree {included|excluded}
no snmp-server view view-name [oid-subtree]
Parameters
Parameter
view-name
oid-subtree
included
excluded
User Level
admin
community, set snmp
group, show snmp
show snmp view,
snmp-server remote-user,
show snmp, snmp trap
snmp-server informs
Description
The name of the view
The object identifier subtree to be included
in or excluded from this view. Oid-subtree is
specified as a series of period-separated
numbers. In order to include a subtree
family, use an asterisk as a wildcard
character. Symbolic MIB object names are
not supported.
Keyword indicating that the view includes
the specified subtree (this is the default)
Keyword indicating that the view excludes
the specified subtree
retries, set snmp timeout,
retries, show snmp
snmp-server community,
snmp-server view
auth, set snmp trap enable | disable
link-status, snmp-server enable
SNMP access configuration
show snmp, show snmp
timeout, show snmp user,
snmp-server engineID,
frame-relay,
notifications,
Possible Default
Values Value
Issue 1 January 2008
show
1085