Set Port Name - Avaya G450 Cli Reference Manual

CLI Commands

set port name

Use the set port name command to configure a name for a port. If you do not specify a
name, the port name displays as NO NAME.
Syntax
set port name module/port [name]
Parameter
Parameter
module
port
name
User Level
read-write
Context
general
Example
To set the name of port 6/5 to "arthur":
G450-001# set port name 6/5 arthur
Port 6/5 name set.
Note:
If you wish to define a name which includes spaces, you must enclose the entire
Note:
name in quotation marks, for example "new york".
382 Avaya G450 CLI Reference
Description
Number of the module
Number of the port on the module.
You can also specify a range of ports
separated by a dash, for example, 10/5-6 for
both ETH LAN ports 5-6 on the front panel.
The port name
Ethernet port configuration
Possible Default
Values Value
maximum
16-character
string