Set Logging Server Enable | Disable - Avaya G450 Cli Reference Manual

User Level
read-write
Context
general
Example
To filter fan messages for the Syslog server at IP address 168.23.1.15, so that only fan
messages of warning-level severity or greater are sent:
G450-001(super)# set logging server condition fan warning 168.23.1.15
Related Commands
clear logging file,
access-level, set logging server enable |
show logging file

set logging server enable | disable

Use the set logging server enable or set logging server disable command to
enable or disable a specific Syslog server.
Syntax
set logging server {enable | disable} ip_address
Parameters
Parameter
enable
disable
ip_address
User Level
read-write
clear logging server, set logging
content, show logging server
Description
Keyword specifying to enable logging for the
Syslog server
Keyword specifying to disable logging for
the Syslog server
The IP address of the Syslog server
file, set logging
disable, set logging server
condition, show logging session condition
server, set logging server
facility, set logging session,
Possible Default
Values Value
Issue 1 January 2008
Logging
551