Threshold Count - Avaya G450 Cli Reference Manual

CLI Commands

threshold count

Use the threshold count command to specify the upper and lower thresholds for the
threshold in the track list command. Use the no form of this command to restore the
default values.
Syntax
[no] threshold count [up up_number] [down down_number]
Parameters
Parameter
up_number
down_number
User Level
read-write
Context
track list
Example
To specify that for list 5, the state will change from down to up if 4 or more hosts are up:
G450-001(config-track list 5)# threshold count up 4
To specify that for list 5, the state will change from up to down if 2 or less hosts are up:
G450-001(config-track list 5)# threshold count down 2
Related Commands
description (object
614 Avaya G450 CLI Reference
Description
The upper threshold for the threshold count
in the track list command
The lower threshold for the threshold count
in the track list command
tracking), object, track, show track
Object tracking
Possible Default
Values Value
1-50 1
1-50 0