Destination-Ip - Avaya G450 Cli Reference Manual

Parameters
Parameter
index
User Level
read-write
Context
ip access-control-list/ip-rule, ip capture-list/ip-rule, ip qos-list, ip qos-list/dscp-table, ip qos-list/
ip-rule
Example
To enter configuration mode for composite operation 13:
G450-001(QoS 440)# composite-operation 13
G450-001(QoS 440/CompOp 13)#
Related Commands - Packet sniffing
cookie, copy capture-file
policy-based routing, packet
Related Commands - Policy
cookie, destination-ip,
packet sniffing), name, owner,
show list, source-ip,
udp source-port

destination-ip

Use the destination-ip command to specify the destination IP address of packets to which
the current rule applies.
Use the not form of the command to specify that the current rule applies to all packets that do
not have this destination IP address.
Use the no form of the command to set the destination IP address to
Syntax
[not] destination-ip {host ip}|any|{ip wildcard}
no destination-ip
Description
The composite operation number
ftp, copy capture-file
sniffing), owner,
dscp (policy), dscp-table, icmp,
show composite-operation,
tcp destination-port, tcp
Possible
Values
12-19
scp, copy capture-file
show ip capture-list, show upload status
ip-rule (policy, policy-based routing,
show dscp-table,
established, tcp source-port,
Packet sniffing
Default
Value
tftp, ip-rule (policy,
show isdn bri
udp destination-port,
.
any
Issue 1 January 2008
link,
651