Set Sls - Avaya G450 Cli Reference Manual

CLI Commands
Syntax
sls
User Level
read-write
Context
general
Example
To enter the
sls
G450-001(super)# sls
G450-001(super-sls)#
Related Commands
bri, clear survivable-config, dial-pattern,
station, trunk-group

set sls

Use the set sls command to enable or disable SLS.
Note:
If the SLS survivable call engine is currently running, you can issue this
Note:
command to stop SLS from operating.
Note:
If you enabled SLS and then entered additional administration, you must first
Note:
disable SLS and then re-enable it. This will cause the SLS application to
resynchronize its administrative database with the gateway's global CLI
command database.
Syntax
set sls {enable | disable}
922 Avaya G450 CLI Reference
context:
ds1 incoming-routing,
,
SLS survivability
set sls, show sls, sig-group,