Set Port - Avaya G450 Cli Reference Manual

CLI Commands

set port

Use the set port command to administer a port on a station for SLS.
Syntax
set port module-port
Parameters
Parameter
module-port
Assign a port from this list:
User Level
read-write
Context
sls > station
1026 Avaya G450 CLI Reference
Description
The virtual integrated port assignment
for the module in G450
Table 112: Module-port values in SLS station configuration mode
Gateway Media
module
MM711
MM712
MM714
G450
MM716
MM717
* You cannot select these modules/ports if they are already assigned as
DID trunks.
Possible Values
Depends on class
administered with
the
command; see
below
Analog station DCP
*
ports
8 possible ports
8 possible ports
4 possible ports
(ports 1-4)
24 possible ports
24 possible ports
SLS survivability
Default
Value
set type (station)