Cna-Testplug-Service; Show Cna Testplug - Avaya G450 Cli Reference Manual

cna-testplug-service

Use the cna-testplug-service command to enable the CNA test plug service on the
gateway. Use the no form of the command to disable CNA test plug service on the gateway. In
order to enable the test plug, both the test plug and the test plug service must be enabled. Use
the shutdown and no shutdown commands in the test plug context to disable/enable the test
plug itself.
Syntax
cna-testplug-service
User Level
admin
Context
general
Example
To enable the CNA test plug service:
G450-001# cna-testplug-service
The Converged Network Analyzer test plug is enabled.
Related Commands
clear counters (CNA test
scheduler, show cna

show cna testplug

Use the show cna testplug command to display CNA test plug configuration and statistics.
Syntax
show cna testplug
User Level
read-only
Context
cna-testplug
plugs), cna testplug, control-port, rtp-echo-port, rtp-test-port,
testplug, shutdown (CNA test plugs), test-rate-limit
Issue 1 January 2008
CNA test plugs
221