Be Out - Avaya G450 Cli Reference Manual

CLI Commands
Related Commands - Traffic shaping
frame-relay traffic-shaping,
frame-relay, show
traffic-shape rate
Related Commands
clear frame-relay
interface-dlci,
frame-relay lmi-type,
map-class frame-relay,
brief, show interfaces,

be out

Use the be out command to configure the excess burst size in bits, for the outbound direction.
Use the no form of this command to return the excess burst size to its default value.
Note:
The Excess Information Rate (EIR) is equal to: (BC+BE)/Tc/1000, where Tc is the
Note:
Frame Relay meter time interval in mSec, BC is the committed burst rate and BE
is the excess burst size.
Syntax
be out bits
no be out
Parameters
Parameter
bits
User Level
read-write
Context
map-class frame-relay
428 Avaya G450 CLI Reference
map-class
traffic-shape, show
counters, interface
frame-relay lmi-n391dte,
frame-relay priority-dlci-group,
be out, cir out, fragment,
show traffic-shape,
Description
The excess burst size in bits
frame-relay, be out,
traffic-shape-queue,
serial, encapsulation,
frame-relay lmi-n392dte,
frame-relay
show frame-relay
GRE tunneling, show traffic-shape-statistics
Frame relay encapsulation
cir out, fragment, show map-class
show traffic-shape-statistics,
frame-relay class-dlci,
frame-relay lmi-n393dte,
traffic-shaping, ip
map, show frame-relay pvc
Possible
Values
0-39999999
frame-relay
address,
Default
Value
7000