Ip Default-Gateway - Avaya G450 Cli Reference Manual

CLI Commands

ip default-gateway

Use the ip default-gateway command to define a default gateway (router). Use the no
form of this command to remove the default gateway.
Syntax
ip default-gateway {ip_address | {interface_type interface_number}}
[cost] [preference] [permanent | track track-index]
no ip default-gateway
Parameters
Parameter
ip_address
interface_type
interface_number
cost
preference
permanent
track
track-index
User Level
read-write
Context
general
Example
To set the default gateway to the IP address 132.55.4.45, having a cost value of 4 with high
preference, and applying object tracker 20:
G450-001(super)# ip default-gateway 132.55.4.45 4 high track 20
884 Avaya G450 CLI Reference
Description
The IP address of the router
The interface type
The interface number
The path cost
The preference
Keyword that specifies not to disable
the router if the interface is down
Keyword that specifies to apply
tracking to monitor the default
gateway.
Note: Tracking only applies to
non-permanent default gateways.
The index number of the object
tracker
Routing table configuration
Possible Default
Values Value
1
High, Low Low
1-50