Fdl - Avaya G450 Cli Reference Manual

fdl

Use the fdl command to define the type of Facility Data Link loopback that the remote line is
requested to enter. Use the no form of the command to disable FDL.
Note:
This command can only be used when ESF framing is defined.
Note:
Syntax
fdl fdl_mode
no fdl
Parameters
Parameter
fdl_mode
User Level
read-write
Context
interface:Controller (T1)
Example
To set the FDL type to ansi:
G450-001(super-controller:5/1)# fdl ansi
Related Commands
clear controller
source, ds-mode, framing,
remote, show controllers,
Description
The FDL type
counters, controller, cablelength
interface serial,
show controllers
Possible Values
ansi, att, both
long, cablelength
ip address, linecode (E1),
remote, show ds-mode
E1/T1 interfaces
Default Value
both
short, channel-group,
linecode (T1), loopback,
Issue 1 January 2008
clock
363