Aaa Authorization - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

aaa authorization

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
aaa authorization { exec | commands level } authorListName authMethod
[ authMethod ]*
no aaa authorization { exec | commands level } authorListName
Command introduced before JunosE Release 7.1.0.
Sets parameters that restrict a user's access to a network. The no version disables
authorization for a function.
exec—Runs authorization to determine if the user is allowed to run Exec mode
commands
level—Privilege level of commands for which authorization is run; in the range 0–15
authorListName—Name of the authorization methods list of up to 32 characters
authMethod—Authorization method:
if-authenticated—Allows the user to access the requested function if the user is
authenticated
none—NAS does not request authorization information; authorization is not performed
over this line
tacacs+—NAS exchanges authorization information with the TACACS+ security
daemon
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Global Configuration
Chapter 2: A Commands
35