show aaa authentication default
show aaa authentication { subscriberType } default [ filter ]
Syntax
Command introduced before JUNOSe Release 7.1.0.
Release Information
Displays the AAA authentication method list used for the particular type of subscriber.
Description
Options
Privileged Exec
Mode
subscriberType Specifies the type of subscriber:
atm1483 ATM 1483 subscribers
ip IP subscriber management interfaces
ipsec IPSec subscribers
ppp PPP subscribers
radius-relay RADIUS relay subscriber
tunnel Tunnel subscribers
filter See Filtering show Commands on page 4
Chapter 7: S Commands
show aaa authentication default
519