Aaa Authentication Default - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

aaa authentication default

Syntax
Release Information
Description
Options
Mode
32
aaa authentication subscriberType default authenticator [ authenticator ]*
no aaa authentication subscriberType default
Command introduced before JunosE Release 7.1.0.
Specifies the authentication method used for a particular type of subscriber. The no
version produces the same result as specifying the radius value.
subscriberType—Type of subscriber:
atm1483—Specifies ATM 1483 subscribers
ip—Specifies IP subscriber management interfaces
ipsec—Specifies IPSec subscribers
ppp—Specifies PPP subscribers
radius-relay—Specifies RADIUS relay server subscribers
tunnel—Specifies tunnel subscribers
authenticator—Authentication method:
none—Disables authentication, allowing all users access
local—Enables local authentication; supported for PPP subscribers only
radius—Enables RADIUS for authentication
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Global Configuration
Copyright © 2010, Juniper Networks, Inc.