Aaa Tunnel Client-Name - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

aaa tunnel client-name

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
aaa tunnel client-name name
no aaa tunnel client-name
Command introduced before JunosE Release 7.1.0.
Specifies the default tunnel client name. If the tunnel client name is not included in the
tunnel attributes that are returned from the domain map or authentication server, the
router uses the default name. The no version deletes the client name.
name—Default tunnel client name; a string of up to 32 characters
Global Configuration
Chapter 2: A Commands
67