Clear Mpls Dynamic-Interfaces On-Major-Interfaces - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
clear mpls dynamic-interfaces on-major-interfaces
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
clear mpls dynamic-interfaces [ ip | ipv6 ] on-major-interfaces
[ interfaceType interfaceSpecifier ]
Command introduced in JunosE Release 7.2.0.
Removes and re-creates both dynamic IPv4 interfaces and dynamic IPv6 interfaces that
are on top of all MPLS major interfaces or on top of the specified MPLS major interface.
There is no no version.
ip—Specifies that only IPv4 dynamic interfaces are removed and re-created
ipv6—Specifies that only IPv6 dynamic interfaces are removed and re-created
interfaceType—Interface type; see "Interface Types and Specifiers" on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Privileged Exec
Chapter 4: C Commands
423
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?