Clear Ipv6 Prefix-List - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
clear ipv6 prefix-list
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
clear ipv6 prefix-list [ listName [ network/length] ]
Command introduced before JunosE Release 7.1.0.
Clears all hit counts in all IPv6 prefix lists, the specified prefix list, or the specified entry
from the specified prefix list. There is no no version.
listName—Name of the IPv6 prefix list; string of up to 32 characters
network—Base address of the network route to be filtered; for example, ::ffff:a:b:c:d
length—Length of the network prefix; number of bits masking base address to produce
address to be matched
Privileged Exec, User Exec
Chapter 4: C Commands
413
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?
Questions and answers