Show Ip Bgp Advertised-Routes - Juniper JUNOSE 11.1.X - COMMAND REFERENCE N TO Z 4-6-2010 Command Reference Manual

JUNOSe 11.1.x Command Reference Guide N to Z

show ip bgp advertised-routes

To display routes advertised to a neighbor or peer group in all address families or a
Syntax
particular address family:
show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName |
l2vpn [ all ] | route-target signaling ]
{ neighbors { ipAddress | ipv6Address } | peer-group peerGroupName }
advertised-routes [ fields { fieldOptions } ] [ delta ] [ filter ]
To display routes advertised to the specified peer group for all VPN address families
or for a particular VPN address family after the application of route-target filters
advertised by the specified member of the peer group:
show ip bgp [ vpnv4 all | vpnv4 vrf vrfName ] | l2vpn [ all ] | route-target signaling ]
peer-group peerGroupName advertised-routes
route-target-filter neighbor { ipRtfNbrAddress| ipv6RtfNbrAddress }
[ fields { pgfieldOptions } ] [ delta ] [ filter ]
To display the route that best matches the specified address for all address families
or for a particular address family; not available for the L2VPN address family:
show ip bgp [ ipv4 unicast | ipv4 multicast | vpnv4 all | vpnv4 vrf vrfName ]
{ neighbors { ipAddress | ipv6Address } | peer-group peerGroupName }
advertised-routes network [ networkMask [ longer-prefixes ] ]
[ fields { fieldOptions } ] [ delta ] [ filter ]
To display routes advertised to a neighbor or peer group with the specified site ID
and block offset in the L2VPN address family:
show ip bgp l2vpn all
{ neighbors { ipAddress | ipv6Address } | peer-group peerGroupName }
advertised-routes site-id siteId block-offset blockOffset
[ fields { fieldOptions } ] [ delta ] [ filter ]
To display all routes or the route that best matches the specified address advertised
to a neighbor or peer group in only the route-target address family:
show ip bgp route-target signaling
{ neighbors { ipAddress | ipv6Address } | peer-group peerGroupName }
advertised-routes rtfPrefix [ longer-prefixes ]
[ fields { fieldOptions} ] [ delta ] [ filter ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
l2vpn and all keywords added in JUNOSe Release 7.1.0.
site-id keyword and siteId variable added in JUNOSe Release 7.1.0.
block-offset keyword and blockOffset variable added in JUNOSe Release 7.1.0.
ipv6Address variable added in JUNOSe Release 8.0.0.
route-target signaling and route-target-filter neighbor keywords and
ipRtfNbrAddress, ipv6RtfNbrAddress, and rtMemNlri variables added in JUNOSe Release
8.2.0.
708
show ip bgp advertised-routes