Clear Bridge Interface Vpls - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

JunosE 11.2.x Command Reference Guide A to M

clear bridge interface vpls

Syntax
Release Information
Description
Options
Mode
Related Topics
370
clear bridge interface vpls vplsName
Command introduced in JunosE Release 7.1.0.
Removes from the forwarding table for a VPLS instance all dynamic (learned) MAC
address entries on the VPLS virtual core interface, which represents all of the MPLS
tunnels from the router to the remote VPLS edge (VE) devices. There is no no version.
NOTE: Using the clear bridge interface vpls command affects the VPLS virtual core
interface, but has no effect on the network interfaces associated with the VPLS instance.
To remove all MAC addresses from the forwarding table for a VPLS network interface,
use the clear bridge interface command.
vplsName—Name of a VPLS instance created with the bridge vpls
transport-virtual-router command
Privileged Exec
Clearing Dynamic MAC Addresses from the VPLS Forwarding Table in the JunosE BGP
and MPLS Configuration Guide
Copyright © 2010, Juniper Networks, Inc.