Clear Captive-Portal; Table 385: Clear Captive-Portal Interface Output Fields - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

clear captive-portal

Syntax
clear captive-portal (firewall [interface-names] | interface (all | [interface-names]) |
Release Information Command introduced in Junos OS Release 10.1 for EX Series switches.
Description Reset the authentication state of a captive portal interface or captive-portal firewall
statistics on one or more interfaces.
Options firewall [interface-names]
interface (all | interface-names)
mac-address mac-addresses
Required Privilege view
Level
Related
Documentation
List of Sample Output clear captive-portal interface on page 2967
clear captive-portal interface on page 2967
clear captive-portal mac-address on page 2967
clear captive-portal firewall on page 2967
Output Fields Table 385 on page 2966 lists the output fields for the
(The
no output). Output fields are listed in the approximate order in which they appear.

Table 385: clear captive-portal interface Output Fields

Field Name Field Description
Interface on which captive portal has been configured.
Interface
2966
®
OS for EX Series Ethernet Switches, Release 10.4
mac-address [mac-addresses])
—Resets captive portal statistics on all interfaces or on the
specified interface.
all interfaces or the specified interfaces.
—Resets the authentication state for the specified MAC
addresses.
show captive-portal authentication-failed-users on page 2972
show captive-portal interface on page 2975
show captive-portal firewall on page 2973
Example: Setting Up Captive Portal Authentication on an EX Series Switch on page 2821
Configuring Captive Portal Authentication (CLI Procedure) on page 2848
clear captive-portal firewall
—Resets the authentication state of users connected to
clear captive-portal interface
and
clear captive-portal mac-address
Copyright © 2010, Juniper Networks, Inc.
command.
commands have