Clear Bridge Interface - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

clear bridge interface

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
clear bridge interface interfaceType interfaceSpecifier
Command introduced before JunosE Release 7.1.0.
Removes from the forwarding table all dynamic (learned) MAC address entries for a
specified network interface that belongs to a bridge group or to a VPLS instance . There
is no no version.
NOTE: Using the clear bridge interface command for a VPLS instance affects
the specified network interface associated with the VPLS instance, but has
no effect on the VPLS virtual core interface, which represents all of the MPLS
tunnels from the router to the remote VPLS edge (VE) devices. To remove
all MAC addresses from the forwarding table for the VPLS virtual core
interface, use the clear bridge interface vpls command.
interfaceType—One of the following interface types listed in "Interface Types and
Specifiers" on page 5
atm
fastEthernet
gigabitEthernet
tenGigabitEthernet
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Privileged Exec
Clearing Dynamic MAC Addresses from the VPLS Forwarding Table in the JunosE BGP
and MPLS Configuration Guide
Chapter 4: C Commands
369