Classifier-Group - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

classifier-group

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
classifier-group { * | classifierName } [ precedence precValue ] [ parent-group
parentGroupName ] [ external parent-group externalParentGroupName
parameter parameterName ]
no classifier-group { * | classifierName ]
Command introduced before JunosE Release 7.1.0.
parent-group keyword and parentGroupName variable added in JunosE Release 7.2.0.
external parent-group keyword and externalParentGroupName variable added in JunosE
Release 8.0.0.
Creates a classifier group for a policy list and assigns precedence to the specific CLACL
in the group. This command accesses Classifier Group Configuration mode, in which you
create policy rule configurations related to the specified CLACL. If a parent group was
not created by the parent-group command, the parent-group keyword creates a parent
group in a rate-limit hierarchy for IP, IPv6, L2TP, and MPLS. All packets matching the
classifier are sent to the parent group for further processing, except for packets dropped
by the classifier using the filter rule. More than one classifier group can have the same
parent group, which enables you to create hierarchies. The no version removes the
classifier group and its rules from the policy list.
*—Specifies that the router selects all packets from the interface associated with the
policy list for this classifier group
classifierName—Name of a specific CLACL used to classify packets in this policy list
precValue—Precedence value for the CLACL, in the range 0–65535; a value of 100 is
assigned if no value is specified
parentGroupName—Name of the parent group; if the parent group does not exist,
naming the parent group creates an empty parent group
NOTE: Secure policy lists, which are used for packet mirroring operations,
do not support named classifier groups. You must use classifier-group *.
Also, secure policy lists do not support the precedence keyword.
externalParentGroupName—External parent group name
parameterName—Parameter name
Policy List Configuration
Creating a Classifier Group for a Policy List
Configuring CLI-Based Mirroring
Chapter 4: C Commands
353